The thermally separated stand-off installation in external thermal insulation composite systems.

Stand-off installation TherMax 8

The fischer stand-off installation system TherMax 8 is a solution for thermally separated fixation in external thermal insulation composite systems (ETICS). The threaded rod has a glass-fibre-reinforced cone and cuts its own way through the plaster and into the insulation material without a setting tool. The cone on the head of the threaded rod interrupts the thermal bridge. The adjustable system is suitable for fixations in ETICS and non-load-bearing layers of 45 mm to 180 mm in thickness. The fischer TherMax 8 can hold medium-sized loads such as lights, letterboxes, and lightning rods in concrete, aerated concrete, and masonry made from perforated or solid brick.

Product variants

Download of image data

Product variants

12 Product variant (s)

Drill diameter

Drill hole depth

Max. thickness of non-bearing layer

Anchorage depth

Cover cap-ø

Width across nut

Viewed 12 of 12 variant (s)

Advantages

The stand-off installation allows for the fixture to be adjusted to the exact position required, which avoids pressure marks and damage to the ETICS.
The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
The glass-fibre-reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
Combining with the universal plug UX provides secure anchoring in the substrate.
Without the UX plug, direct installation in a wooden substrate is possible after pre-drilling, too.

Applications

For the thermally separated fixing of:

Signs
Lighting
Letter boxes
Motion detectors
Downpipes
Lightning rods
Blind guide rails

Building materials

Concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid sand-lime brick
Building brick
Aerated concrete
Wood

You can find detailed information on building materials in the registration document.

Functionality

The TherMax 8 is suitable for pre-positioned installation.
The self-tapping, glass-fibre-reinforced cone cuts its own way through the plaster into the insulation during installation.
The anti-cold cone uses a thermal barrier to minimise heat losses.
Installation does not require any special tools.
For use in wood without a plug, the wood (see the footnote beneath the load table) and plaster must be pre-drilled: TherMax 8: d02 = 14 mm, h02 = 50 mm.
The assortment offers connection possibilities using metric screws M6, self-tapping screws 6.3 mm, chipboard screws 6.0 mm, and 4.5-5.5 mm chipboard screws when using a SX Plus 5 plug.

Mounting Strip 1 Picture

1 / 8

Mounting Strip 2 Picture

1 / 6

System components

Hammer drill bit Quattric II S / Quattric II
84 variants

Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	120 mm
Max. thickness of non-bearing layer ( e )	45 - 60 mm
Anchorage depth ( h_ef )	60 mm
Cover cap-ø ( ADK )	18 mm
Width across nut	10 mm
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M6 / 6.3
Contents	20 x TherMax 20 x UX 10 x 60 20 x SX Plus 5 x 25 20 x Cover cap
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4006209456859

Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	140 mm
Max. thickness of non-bearing layer ( e )	60 - 80 mm
Anchorage depth ( h_ef )	60 mm
Cover cap-ø ( ADK )	18 mm
Width across nut	10 mm
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M6 / 6.3
Contents	2 x TherMax 2 x UX 10 x 60 2 x SX Plus 5 x 25 2 x Cover cap
Packaging	Folding box
Amount	2 pcs.
GTIN (EAN-Code)	4006209456804

Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	140 mm
Max. thickness of non-bearing layer ( e )	60 - 80 mm
Anchorage depth ( h_ef )	60 mm
Cover cap-ø ( ADK )	18 mm
Width across nut	10 mm
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M6 / 6.3
Contents	20 x TherMax 20 x UX 10 x 60 20 x SX Plus 5 x 25 20 x Cover cap
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4006209456866

Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	160 mm
Max. thickness of non-bearing layer ( e )	80 - 100 mm
Anchorage depth ( h_ef )	60 mm
Cover cap-ø ( ADK )	18 mm
Width across nut	10 mm
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M6 / 6.3
Contents	2 x TherMax 2 x UX 10 x 60 2 x SX Plus 5 x 25 2 x Cover cap
Packaging	Folding box
Amount	2 pcs.
GTIN (EAN-Code)	4006209456811

Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	160 mm
Max. thickness of non-bearing layer ( e )	80 - 100 mm
Anchorage depth ( h_ef )	60 mm
Cover cap-ø ( ADK )	18 mm
Width across nut	10 mm
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M6 / 6.3
Contents	20 x TherMax 20 x UX 10 x 60 20 x SX Plus 5 x 25 20 x Cover cap
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4006209456873

Stand-off installation TherMax 8

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download