• Products
  • Training
  • Service
  • Expertise
  • fischer Stories
  • fischer group
Remedial wall tie VBS
  • Product Category Picture: "Remedial wall tie mechanical VBS-M"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The quick repair for double- shell facades.

      Remedial wall tie mechanical VBS-M

      The fischer remedial wall tie VBS-M is suitable for the renovation of two-shell masonry. Above all, it is used for the subsequent application of heat insulation or to secure a suspended, rear-ventilated façade. Thanks to the two expansion zones of the plug, the cost-effective solution enables the safe connection of the facing masonry and outer shell. The low anchorage depth of just 50 mm also enables fast and cost-effective installation in stone and in bed joints. The slim plug edge and head enable a flush installation or a deeper installation with no annoying projection. The drill hole can be retrospectively grouted so that it is no longer visible.
      Product variants
      Download of image data

      Product variants

      Filter
      Filter
      14 Product variant (s)
      Max. shell distance at 115 mm facing masonry, flush installation
      Max. shell distance at 115 mm facing masonry, 20 mm sunk installation
      Facing masonry + cavity
      Drill diameter
      Drill hole depth
      Anchor length
      Viewed 14 of 14 variant (s)

      The advantages / Product description

      Advantages
      • The approved fixing in stone and in joints from at least 50 mm facing masonry provides a high degree of flexibility and security.
      • Use in joints and with a low anchorage depth of just 50 mm allows for a quick and economical installation.
      • The small anchor rim and screw head allow for a surface-flush or deep-set installation.
      • The drill hole can be retrospectively sealed so that it is no longer visible in the façade.
      • A drip coil prevents condensate running into the load-bearing layer, thus preventing frost and corrosive damage.

      Application and approval

      Applications
      • VBS-M is especially suitable for applications where external thermal insulation composite systems (ETICS) have been previously installed.
      • Retrorespective repair of facing masonry.
      Building materials
      • Facing masonry with and without an air layer
      You can find detailed information on building materials in the registration document.
      Approvals
      • Z-21.2-1956

      Assembly instruction

      Functionality
      • The remedial wall tie VBS-M is set in the load-bearing layer and into facing masonry using push-through installation.
      • In accordance with the approval, no drill hole cleaning is required.
      • The two expansion zones in the load-bearing layer and in the facing masonry ensure a secure fixation.
      • The plug doesn't fix into the facing masonry until the head grips into the load-bearing layer. This ensures the very best installation safety.
      Mounting Strip 1 Picture
      1 / 4
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture

      Documents for download

      • Approvals and Certificates
      DIBt, National German Certification
      pdf, Z-21.2-1956
      National technical approval - fischer remedial wall tie VBS-M for subsequent anchorage of outer masonry leaf
      Valid from 22/04/2021
      to 22/04/2026
      cd-blue-c6785f99-77wnx